Flir Dnr408po 8 Channel 2tb Poe Nvr Surveillance Security System

“STORE DISPLAY 8 CHANNEL FLIR NVR SYSTEM. SUPPORTS BOTH LOREX and FLIR BRAND POE NETWORK CAMERAS. DVR WAS USED AS A STORE DISPLAY. MINOR SCRATCHES AND SCUFFS POSSIBLE. FULLY TESTED AND RESET TO DEFAULT PASSWORD AND SETTINGS. HARD DRIVE IS INCLUDED. NO CAMERAS ARE INCLUDED. IF YOU NEED CAMERAS PLEASE CHECK OUT OUR STORE OR MESSAGE US. DVR COMES WITH POWER CABLE, NETWORK CABLE, HDMI CABLE AND MOUSE”” About FLIR DNR408PO NVR 2TB
FLIR's DNR400 Series NVR further accelerate high definition recording, offer ring higher capacity 200 Mbps processing for real-time recording with cameras up to 5MP. With eight integrated Power over Ethernet (PoE) inputs and PoE+ support, installation is made simple. No programming or configuration is necessary as the NVR automatically discovers FLIR IP Cameras on the network. Plus, drive mirroring enables back-up recordings to the second internal hard disk drive to keep data secure.
DNR400 features FLIR Cloud, an easy-to-use, cloud-enabled service that provides remote viewing and control of multiple cameras from various locations via iOS, Android, PC or Mac devices. No complex router configuration necessary, making video monitoring easier than ever before. Set up remote viewing in three easy steps: install the free FLIR Cloud app, scan QR code on NVR, view live video.
FLIR DNR408PO Features

Higher Capacity Processing

Real-time recording in Full HD on each channel

Turbo 200 Mbps network bit rate

Supports HD real-time recording with cameras up to 5MP

Pentaplex operation - simultaneous View, Record, Playback, Backup & Remote Monitoring

Easy Installation

Integrated PoE inputs for quick, convenient connection

8 integrated PoE ports with PoE+ support

120watt total PoE (up to 25w/channel)

Auto-discovery of FLIR IP Cameras with no programming

Redundant Recording

Back-up to keep data secure

Drive mirroring to second internal HDD

Supports 2 x SATA HDDs up to 4TB (8TB total)

Instant back-up via 2 x USB 2.0 ports

Flir Cloud - Quick & Secure Remote Viewing

Remote access via iOS, Android, PC / Mac with FLIR Cloud

Set up remote viewing in three easy steps: install FLIR Cloud app, scan QR code on DVR, view live video

Multisite viewing on FLIR Cloud CMS for PC / Mac

FLIR DNR408PO Specifications
Operating System
Linux (embedded)
Pentaplex
Simultaneous view, record, playback,backup & remote monitoring
Number of Channels
8 Channel
Video IN
8 PoE Video Input
Video OUT
No
VGA OUT
Yes
HDMI
Yes
Audio IN
1 Line IN (RCA) for 2 way audio
Audio OUT
1 Line OUT (RCA) for 2 way audio
USB Port
1 at the back, 1 at the front
Alarm IN
4 Alarm IN
Alarm OUT
2 Alarm OUT
Video Output Resolution
1920x1080, 1280x1024, 1280x720, 1024x768
PTZ Control
RS-485, supports Pelco-D and Pelco-P
Live Display
1,4,8
Live Display Speed
240 NTSC
OSD
ON/OFF
System Navigation
USB mouse, IR remote controller, front panel
Motion Area Setting
Adjustable grid (22x18)
Sensitivity
Levels 100
Firmware Upgrade
Automatic over the Internet & via USB device and network
User Authority
By user group
Time Synchronization
Auto time sync by NTP server
Compression
H.264
Recording Resolution
720P (1280x720), 1080P (1920x1080), 3MP (2028x1536), 5MP (2560x1920)
Record Rate
240 (30 per channel) FPS @ 720P / 1080P / 3MP / 5MP
Recording Quality Control
6 levels
Recording Schedule
By hour, by day, by recording mode, by motion, by channel
Pre Recording
Max. 30 Seconds
Post Recording
Max. 5 Minutes
Reliability
Watch-Dog, auto-recovery after power failure
Covert Video
Yes
Playback Channel
1/4
Playback Speed
Variable Max 16x
Playback Players
Backup Player
Search
By time & event
Log Search
Up to 1,000 lines for motion detected, configuration changes, connects/disconnects and video loss
Audio Play
Yes (audio camera required)
Storage
Up to 2 HDDs (SATA)
Maximum Capacity
Up to 2 x 4TB
Backup Media
Backup Media USB flash drive & HDD
Backup File Format
DAV or ASF file
Cloud Connection
FLIR Cloud
Supported Operating Systems
Windows, Mac OSX
Remote Software
Client Software (PC/Mac)
Email Notification
Text with snapshot
Instant Smart Phone & Tablet Support
IPad, IPhone, Android
DDNS Free
FLIR DDNS
System Configuration
Full setup configuration over network
Ports
Programmable by User
Network Protocol
HTTP, IPv4/IPv6, TCP/IP, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter
Network Bit Rate
200Mbs total, 48-8192kbps per camera
IP Cameras Supported
FLIR, Digimerge, Panasonic, Sony, Dynacolor, Samsung, AXIS, Arecont, Bosch, Canon, Honeywell, Pelco, Panasonic, Vivotek
Power Consumption
Approx. 20 watts (No HDD Installed)
Supply Voltage
100V AC-240V AC, 50/60Hz
Total PoE Power Output (across all chann
120W (Max 25W per Camera)
Unit Weight
2.0Kg / 4.4lbs
Dimensions (W x H x D)
267mm x 203mm x 46mm / 10.5" x 8.0" x 1.8"
Operating Temperature
14 Degree - 131 Degree F / -10 Degree - 55 Degree C