Napco Gemini GEM-P800 6 zone System & One Gemini GEMRP8 Keypad DEFAULTED UNLOCKED The GEMINI GEM-P800 control panel provides up to 6 hardwired/wireless zones, a 2-wire fire zone and 2 wireless only zones. Up to eight 4-digit user codes can be programmed. Requires NAPCO GEM RECVXP8 to activate wireless zones. Included is the P800 control board, power transformer, RP8 user keypad. At a minimum the system would require a 12 volt rechargeable battery, EOL resistors 2.2 k ohm, sensors, and alarm sounder. Note: the keypad was tested to be functional, however view the physical condition in the photo. The enclosure box is not the original P800 box. Very Important- As indicated the dealer lockout code is removed and the panel is defaulted to the NAPCO factory program code. The panel must be programmed to the unique user requirements. Programming can be accomplished through the keypad. Installation and programming information is included on a CD if requested.